Advertisement
PACKAGE CONTENTS
A - Transformer x1
B - Bracket x1
H - Wire x1
I - Lamp body x6 J - Lamp post x6 K - Wire connector x6
Safety Information
WARNING: Risk of Electric shock. Do not install the path lights within
10 ft. (3m) of a pool, spa, or fountain.
WARNING: These path lights are for use with outdoor landscape
lighting systems only.
WARNING: Do not disassemble the power supply unit.
WARNING: Do not submerge the transformer.
WARNING: Do not connect two or more transformers in parallel.
WARNING: Do not use with a dimmer.
WARNING: Plug the power supply directly into a GFCI wet location
outlet.
WARNING: Do not use an extension cord.
CABLE SELECTION
12 VOLT TAP
Total Fixture Wattage
0 - 30 Watts
C - Photocell x1
D - Dust cap x1
Cable Length
0 - 50 ft.
51 - 100 ft.
18 AWG
18 AWG
Use and Care Guide
Low Voltage Pathlight Kit
E - 4.8 x 30 Screw x4
L - Ground stake x6
WARNING: Do not overload the transformer. The maximum output of the
transformer is 30 watts. Ensure that the total cumulative wattage of all 12
volt fixtures connected to the transformer is equal to or less than 30 watts.
WARNING: Do not install where airflow around the unit is overly
restricted.
NOTE: This landscape lighting system must be installed in accordance
with all local codes and ordinances. If you are expecting problems, contact
a qualified electrician.
IMPORANT: The main low voltage cable is intended for shallow burial -
less than 6 in. (15.2 cm).
IMPORANT: Route fixture unit low voltage cable in close proximity to the
luminaire or next to a building structure such as a house or deck.
IMPORANT: The fixture low voltage cable is only intended for shallow
burial of less than 6 in. (15.2 cm) when connecting to the main low
voltage cable.
IMPORANT: The fixture low voltage cable may be trimmed to make
an electrical connection within 6 in. (15.2 cm) from a building structure,
luminaire, or fitting.
101 - 150 ft.
16 AWG
1
Item #1002916252
Model #KECP10-LED
F - 3.5 x 15 Screw x2
G - Wall anchor x4
M - Mounting template x1
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HAMPTON BAY KECP10-LED
Summary of Contents for HAMPTON BAY KECP10-LED
- Page 1 Item #1002916252 Model #KECP10-LED Use and Care Guide Low Voltage Pathlight Kit PACKAGE CONTENTS A - Transformer x1 B - Bracket x1 C - Photocell x1 D - Dust cap x1 E - 4.8 x 30 Screw x4 F - 3.5 x 15 Screw x2...
-
Page 2: Assembly And Installation
Assembly and Installation ASSEMBLING AND INSTALLING THE LIGHT FIXTURE WARNING: Do not push the fixture into the ground by the lamp body or use a hammer to insert the ground stake. □ Screw the lamp body (I) into the lamp post (J). □... - Page 3 Assembly and Installation (continued) MOUNTING THE PHOTOCELL □ Mount the photocell bracket (B) on the wall using the screws (F) provided. □ Snap the photocell (C) into the bracket (B). Route or coil the excess wire to protect it. Avoid pointing the photocell at nighttime light sources.
-
Page 4: Operation
Operation SETTING THE ON AT DUSK/OFF AT DAWN FUNCTION (FACTORY DEFAULT SETTING) □ In this mode, the landscape lights will automatically come on at dusk and turn off at dawn. □ Press ON AT DUSK /OFF AT DAWN button. The related indicator light will illuminate and “AU”... -
Page 5: Care And Cleaning
Care and Cleaning □ Clean the light fixture with a soft, dry cloth. □ Do not use cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause Solution □ There is no power. □ Check the outlet and ensure that the circuit breaker or The fixture will not light.
Need help?
Do you have a question about the KECP10-LED and is the answer not in the manual?
Questions and answers