Troubleshooting - Haier HWO90S10EX2 Installation & User Manual

Hide thumbs Also See for HWO90S10EX2:
Table of Contents

Advertisement

You may solve s o m e o f the problems you may encounter with your product by
checking the following points before calling customer care or a service agent.
Check Points
In case you experience a problem about the oven, first check the table below and try
out the suggestions.
Problem
Oven does not operate.
Oven stops during cooking.
Turns off during cooking.
Outer surface of the oven
gets very hot during
operation.
Oven door is not opening
properly.
Internal light is dim or does
not operate.
Electric shock when touching
the oven.

TROUBLESHOOTING

Possible Cause
Power supply not available.
Plug comes out from the wall
socket.
Too long continuous operation.
Cooling fan not operating.
Oven not installed in a location
with good ventilation.
More than one plugs in a wall socket.
Oven not installed in a location
with good ventilation.
Food residues jammed between
the door and internal cavity.
Foreign object covering the lamp
during cooking.
Lamp might be failed.
No proper grounding.
Ungrounded wall socket is used.
31
What to Do
Check for power supply.
Re-install the plug into wall socket.
Let the oven cool down after long
cooking cycles.
Listen the sound from the cooling
fan.
Make sure clearances specified in
operating instructions are maintained.
Use only one plug for each wall
socket.
Make sure clearances specified in
operating instructions are maintained.
Clean the oven well and try to re-
open the door.
Clean internal surface of the oven
and check again.
Replace with a lamp with same
specifications.
Make sure power supply is grounded
properly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents