D-Link DSL-502T Quick Installation Manual page 8

Configuring the Router via the D-Link
Click'n Connect Utility
The Click'n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
This section is only relevant if you selected USB as the connection type at
Step 2. If you selected Ethernet as your connection type, please go back to
Page 5.
Step 4 – Connect the Device to the ADSL Line – USB
If you have selected USB as the connection type, connect your ADSL telephone
line from the wall socket to the DSL-502T ADSL socket. Please note that if you
are using an ADSL Splitter/Filter, you will need to connect the telephone line from
the DSL socket on the filter to the DSL-502T ADSL socket.
Once you have completed this, wait for the ADSL LED to light up, and click on
Next to continue to Step 5.
8
Follow the on-
screen
instructions,
then Click
Next to
continue