D-Link DSL-502T Quick Installation Manual page 5

Configuring the Router via the D-Link
Click'n Connect Utility
T he Click'n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
T his section is only relevant if you selected Ethernet as the connection type
at Step 2. If you selected USB as your connection type, please proceed to
page 7.
S tep 3 – Select Your Connection Type – Ethernet
If you have selected Ethernet as your connection type, connect your Ethernet
cable from the computer to the DSL-502T now. Wait for the Link LED to flash
then click on Next to continue to Step 4.
5
Follow the on-
screen
ins tructions ,
then Click
Next to
continue