D-Link DSL-502T Quick Installation Manual page 6

Configuring the Router via the D-Link
Click'n Connect Utility
The Click'n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
This section is only relevant if you selected Ethernet as the connection type
at Step 2. If you selected USB as your connection type, please proceed to
page 7.
Step 4 – Connect the Device to the ADSL Line – Ethernet
If you have selected Ethernet as the connection type, connect your ADSL
telephone line from the wall socket to the DSL-502T ADSL socket. Please note
that if you are using an ADSL Splitter/Filter, you will need to connect the
telephone line from the DSL socket on the filter to the DSL-502T ADSL so
O nce you have completed this, wait for the ADSL LED to light up, and click on
Next to continue to Step 5 on Page 9.
6
Follow the on-
screen
instructions,
then Click
Next to
continue
cket.