D-Link DSL-502T Quick Installation Manual page 4

Configuring the Router via the D-Link
Click'n Connect Utility
The Click'n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
Step 2 – Select Your Connection Type
Install USB Drivers
S elect the connection type that you would like to use to connect the DSL-502T to
your PC. You can select Ethernet, which uses a network cable to connect it to
your PC, or you can select USB to connect the DSL-502T with a USB cable.
Please note, however, that you will be required to install drivers for the DSL-5
if you proceed with the USB connection option. Click on Install USB Drivers, this
will open a separate program that will install the drivers for you. Once you have
completed with this option, click on Next to continue onto Step 3.
Connection Type
if USB connection required
4
Select your
Click Next to
continue
02T