D-Link DSL-502T Quick Installation Manual page 7

Configuring the Router via the D-Link
Click'n Connect Utility
T he Click'n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
T his section is only relevant if you selected USB as the connection type at
Step 2. If you selected Ethernet as your connection type, please go back to
Page 5.
S tep 3 – Select Your Connection Type – USB
If you have selected USB as your connection type, connect your USB cable from
th e computer to the DSL-502T now. Wait for the Link LED to flash, then click on
Next to continue to Step 4.
7
Follow the on-
screen
ins tructions ,
then Click
Next to
continue