D-Link DSL-502T Quick Installation Manual page 20

Configuring the Router via the Web
Interface
Step 6 – Dynamic IP Address Connectio
Select the Dynamic IP Address connection type if your ISP requires you to use
this connection type to connect onto their ADSL Network. Click Next to continue
Here, you will need to enter your ADSL account details. These details will be
provided to you by your ISP.
1. VPI/VCI: These are provided to you by your ISP.
2. Connection Type: This is provided to you by your ISP. Se
appropriate one as is used by your ISP.
3. Cloned Mac Address: Leave this field unchanged.
Once you have completed this step, Click Next to continue to Step 7 on Page 23.
Leave this unchanged
Enter these details as
provided by your ISP
ns
Click the
20
Next button.
lect the
.