Table of Contents
Advertisement
Fuel
6
Fuel
Wood pellets are natural wood (dried sawdust or waste from machining) that has been formed into pellets
under high pressure. They have a very low moisture content and very high calorific value. The manufacture of
wood pellets is regulated by European standard EN ISO 17225–2.
6.1 Specification for high quality pellets as per EN ISO 17225–2,
class A1
Calorific value
Loose density
Water content
Ash content
Length
Diameter
Fine material
Contents
The heating system is suitable only for pellets of natu-
ral wood that comply with standard EN ISO 17225–2
class A1 with a diameter of 5–7 mm. Using non-pelle-
tised fuels or pellets that are not manufactured from
natural wood will lead to the warranty becoming void
and will cause damage to the pellet boiler and the
chimney.
Use only quality pellets from Austrian standard ap-
proved, DINplus or ENplus approved manufacturers.
4,6 kWh/kg or
16,5 MJ/kg
min. 600 kg/m3
max. 10%Specification for high quality pellets as per EN
ISO 17225–2, class A1
max. 0.7%
max. 40 mm
5 – 7 mm
max. 1%
100% natural wood
Operating Manual Easypell 16 — 32kW
11
Advertisement
Table of Contents
