Getting Started - Pinell SUPERSOUND 201 User Manual

Getting Started

Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
n Main unit x 1
n Power adapter x 1
n Instruction manual x 1
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
n Where the unit will be exposed to direct sunlight.
n Where the unit will be close to heat radiating sources.
n Where the humidity is high and ventilation is poor.
Where it is dusty.
n
n Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Antenna
Fully extend antenna to ensure you receive the best reception possible in both DAB and FM radio
modes. It may be necessary to adjust the position of the radio and/or antenna to achieve the best
signal.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the rear of unit. Then
insert the power adapter into the mains socket. The radio will go to standby.
Press STANDBY button to turn on the radio.
To turn off unit completely, unplug the power adapter from the mains socket.
Automatically Setting the Clock
The clock can be set and updated automatically if receive DAB/FM signals in your location. In
order for the clock to synchronise to the current local time you must leave it on a DAB or FM
station for a short period of time. You can also choose how you would like to keep the clock up to
date the DAB or FM radio signals. Go to System settings - Time/Date - Auto update.
Volume Control
Turn VOLUME knob anti-clockwise to decrease volume and turn clockwise to increase volume.
6