Dab Mode; Getting Started - Pinell Supersound II Instruction Manual

DAB Mode



Getting Started

1. Press MODE repeatedly until < DAB radio > is shows up. For initial use, it will make a full scan
and store stations list in memory.

Note: a. or press MENU, and then turn the SCROLL knob to < DAB >, press it to access.
b. in use, you can redo a full scan to update stations list: press MENU, and then turn the SCROLL knob
to 'Full scan', press it to confirm.
2. Once the scanning is completed, the DAB+, DAB stations will be displayed in alphanumeric order.
The first station in the list will be selected.

Note: if no DAB+, DAB signal is found in your area, it may be necessary for you to relocate your radio.
 Convert to Another DAB+ Station
1. Continue above step 2, you can move back at any time by press BACK.
3. While cursor point to 'Station list', press the SCROLL knob to confirm.
4. Turn the SCROLL knob to cycle through stations list, and then press it to confirm.

Note: if no DAB signal is found in your area, it may be necessary for you to relocate your radio.
Dynamic Label Segment (DLS):
This is scrolling text information supplied by the DAB station. It may comprise information
on music title or detail of the program and is provided by the broadcaster.
20