Install The Power Cord; Selecting Your Language; Setting The Lcd Contrast; Step 1 - Brother DCP-7010 Quick Setup Manual

Step 1

3

Install the Power Cord

Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
6
Setting Up the Machine
Selecting Your
4
Language
1
After turning the power switch on, the LCD
shows:
Select Language
Press Set Key
Press Set.
2
Press the or
and press Set.
English?
▲Yes ▼No
3
If your language is selected, press
If you have set the language wrongly, you can
change the language from the control panel
menu of the machine. (For details, see "How
to change LCD language" in Chapter 6 of the
User"s Guide.)
5

Setting the LCD Contrast

You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu and
1.General Setup.
Press Set.
2
Press or to select
5.LCD Contrast.
General Setup
5.LCD Contrast
Press Set.
3
Press or to select
Press Set.
4
Press Stop/Exit.
to select your language
(Yes).
or to select
or Dark.
Light