B. Using MPoA with a DSL Modem
1. MPoA (RFC1483/2684)
Check "Enable" to enable the MPoA protocol on the WAN interface. Then
select an appropriate encapsulation which provided by your ISP.
2. DSL Modem Settings
Select active PVC channel by Multi-PVC channel item. And then fill all the other
fields in this group with correct parameters according to your ISP's information.
3. WAN IP Network Settings
Enter your allocated WAN IP address (or enable DHCP client to get IP
automatically from ISP) and DSL parameters according to the information
provided by your ISP.
4. Click OK to save settings.
10