Table of Contents
Advertisement
Example 1:
If Tom gives you a SIP URL as sip:63065@fwd.pulver.com then you can input
the number just as the previous figure, except you can change any number in the
Phone Number field.
Example 2:
If Aaron gives you a sip url as sip:aaron@203.69.175.19 then you can enter the
DialPlan as:
Phone Number:
Name:
IP Address / Domain:
Example 3:
If Kevin gives you an IP address 203.69.175.16 only, then you can use keypad on
the phone to dial directly as #203*69*175*16# to Kevin without setup any
information on your DialPlan.
3.2 SIP Related Function Setup
SIP Port: The port number is used to send/receive SIP message for building a
session. While the default value is 5060, you can change it to other number.
However, this situation needs other party to change simultaneously to the same
number.
Registrar: You can enter domain name or IP address of SIP Registrar server. For
example, iptel.org or 195.37.77.101 is identical. You have to apply an account
of SIP Registrar server before you can use it. However, it is not necessary to
use sip registrar server function in order to use VoIP function.
Use Registrar: Check this box then you can use registrar function to register your
Vigor Router with an SIP registrar server.
1234 (any number you like)
aaron
203.69.175.19
13
Advertisement
Table of Contents
