Table of Contents
Advertisement
A. Using PPPoE / PPPoA with a DSL Modem
1. PPPoE / PPPoA Client
Check "Enable" to enable the PPPoE/PPPoA client protocol on the WAN
interface.
2. DSL Modem Settings
Select active PVC channel by Multi-PVC channel item. And then fill all the other
fields in this group with correct parameters according to your ISP's information.
3. ISP Access Setup
Enter your allocated username and password according to the information
provided by your ISP. If you want to connect to Internet all the time, please
check "Always On".
4. Click OK to save settings.
9
Advertisement
Table of Contents
