Table of Contents
Advertisement
1.3.2 Vigor2500Vi
LED
Status
ACT (Activity)
blinking The router is powered on and running properly.
on
ISDN/E-mail
blinking
ADSL
on
green
VoIP
orange
on
Firewall
blinking When encountering DoS attacks.
green
LAN
orange
(P1, P2, P3, P4)
blinking Ethernet packets are transmitting.
Interface
Description
PWR
Connect the included power adapter to the power outlet.
Line
Connect to the analog phone line for PSTN life line.
Phone
Connect to the analog phone for VoIP communication.
ADSL
Connect the ADSL line to access the Internet.
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking), press the hole and keep for more than 5 seconds. When the
Factory Reset
ACT LED begins to blink rapidly, release the button. Then the router will
restart with the factory default configuration.
P1, P2, P3, P4
Connect to the local network devices.
Connected to an external NT1(or NT1+) box provided by your ISDN
ISDN
service provider.
Explanation
The ISDN network is correctly setup.
When detecting one or more user-defined e-mails existing on
mail server.
The ADSL line is showtime.
Solid light when the handset of phone is picked up (off hooked).
Blinking per 0.3 second when phone call is via ISDN loop
through.
Blinking per 2 seconds when phone is connected through VoIP.
Solid light when phone call is via PSTN life line.
The firewall function is active.
A normal 100Mbps connection is through its corresponding
port.
A normal 10Mbps connection is through its corresponding port.
5
Advertisement
Table of Contents
