Table of Contents
Advertisement
B. For MPoA (RFC1483/2684) Users (refer to the following figure)
1. Check that if the Enable option is selected.
2. Verify if all parameters of DSL Modem Settings are entered with correct
value which given by your ISP.
3. Verify if IP Address, Subnet Mask and Gateway are set correctly, or that
your ISP requires using DHCP clients to obtain IP automatically.
4.5 Report to ISP and Dealer for Further Technical Support
1. If the router settings are correct at all, and the router still does not connect,
please contact your ISP technical support representative to help you for
configuration.
2. If the router does not work correctly, please contact your dealer for help. For
any further questions, please send e-mail to support@draytek.com
20
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2500V and is the answer not in the manual?
Questions and answers