Making N In 1 Copies - Brother DCP 7065DN Advanced User's Manual

Chapter 2

Making N in 1 copies

(page layout)
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page. If you want to copy
both sides of an ID card onto one page, see 2
in 1 ID Copy on page 11.
IMPORTANT
• Please make sure the paper size is set to
Letter, A4, Legal or Folio.
• (P) means Portrait and (L) means
Landscape.
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a
Load your document.
b
Press a or b to enter the number of
copies you want.
c
Press Options.
Press a or b to choose Page Layout.
Press OK.
d
Press a or b to choose 2 in 1 (P), 2
in 1 (L), 2 in 1 (ID)
(P), 4 in 1 (L) or Off(1 in 1).
Press OK.
1
For details about 2 in 1 (ID), see 2 in 1 ID
Copy on page 11.
e
Press Start to scan the page.
(For DCP-7065DN) If you placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step f.
f
After the machine scans the page, press
a to scan the next page.
Next Page?
a Yes b No
10
g
2
h
If you are copying from the ADF (For
DCP-7065DN):
Insert your document face up in the direction
shown below:
 2 in 1 (P)
 2 in 1 (L)
 4 in 1 (P)
1
, 4 in 1
 4 in 1 (L)
If you are copying from the scanner
glass:
Place your document face down in the
direction shown below:
 2 in 1 (P)
Place the next page on the scanner
glass.
Press OK.
Repeat steps f and g for each page of
the layout.
After all the pages have been scanned,
press b in step f to finish.
2
2