TechniSat DIGITRADIO 307 Instruction Manual page 51

9.2 Alarm
The alarm switches on the DIGITRADIO 307 at the set time. 2 alarm times can be
programmed. The description of how to programme Alarm 1 serves as an example.
9.2.1 Setting the alarm
> Open the MENU > [Alarm] and press the TUNING / SELECT knob .
Alternatively: Press the ALARM (7) button on the front of the device.
> Use the TUNING / SELECT knob to select an alarm (Alarm 1 or Alarm 2) that
you wish to set and press the TUNING / SELECT knob.
> The specific alarm parameters can then be configured.
Alarm
> Switch the alarm [On] or [Off].
Frequency (alarm repeat)
> Here you can select between Daily (every day of the week), Once, Weekdays
(Mon - Fri) and Weekends (Sat and Sun). Press the TUNING / SELECT knob to
accept the setting.
Alarm time
> Here you can enter the alarm time and date (if required).
Use the TUNING / SELECT knob first to select the hours and press the
TUNING / SELECT knob to accept the setting. Then enter the minutes. Accept
these in the same way, by pressing the TUNING / SELECT knob.
If Repeat > [Once] has been selected, you must also enter the date as well as
the time.
Source
> You then enter the source. The available options are BUZZER, Digital radio,
and FM. Press the TUNING / SELECT knob to accept the setting.
If you have selected DAB or FM, you can then enter whether or not you
want to be woken up by the last station listened to or by one from your
Favourites list (if favourites have been saved).
Duration
> Then enter the duration. Accept the input by pressing the TUNING / SELECT
knob.
DE
EN
FR
NL
51