What To Do In Case Of Problems - ELCOM Uniq Monitor 215 User Manual

Troubleshooting

WHAT TO DO IN CASE OF PROBLEMS

If problems occur when using the device that prevent its proper use, please look over this chapter, which
will help you solve some common problems. If you do not find the solution to your problem in the table,
contact Elcom's technical support team. You'll find contact information on the Web site at www.elcom.eu. If
you have problems with the software applications not supplied by the company Elcom, contact the supplier
of the relevant application.
Problem
After pressing the on/off but-
ton the computer does not
switch on.
No image appears on the
display
36
Solution
Check the power adapter connection, the LED on the adapter should be
lit – if it is not lit, the problem is either with the electrical socket connection
or with the power adapter.
If after pressing the button the LED on the front panel does not turn off and
the adapter is okay, then the probably a fault in the hardware is involved
- contact service.
Press the operating on/off button; the device might be in sleep mode.