Advertisement
Quick Links
Technical Data TD150029EN
PXM4/6/8K meter color touchscreen
display quick start guide
For detailed information concerning the operation and features
available in the PXM4/6/8K meter display - 6" color touchscreen
(PXM468K-DISP-6-XV), please refer to PXM4/6/8K meter color touch-
screen display features (IB150021EN) available on the Eaton website
(www.eaton.com/meters).
Figure 1. Color touchscreen display for PXM4/6/8K series meter.
Meter firmware requirements
The minimum meter firmware version required for compatibility is
•
13.3.6.1.
Technical information
640 x 480 pixel backlit VGA touch screen display.
•
Power: 24 Vdc input.
•
Recommended: PXM display power cable (67A2180H11)
•
between the display and PXM4/6/8K's CM3 source
Optional: PSG60E (85-264Vac), PSG60F (320-576Vac)
•
Effective November 2020
Supersedes June 2019
Display measurements
Height: 5.24 in. (133 mm);
•
Width: 6.81 in. (173 mm);
•
Depth: 1.54 in. (39 mm);
•
Weight: 1.32 lb (600 g);
•
Cutout dimensions: 4.61 in. x 6.18 in.(117 .0 x 157 .0 mm).
•
Ratings
Front bezel IP rating: IP65;
•
Operating temperature: 0 ~ 50°C (32 ~ 122°F);
•
Storage temperature: -20 ~ 60°C (-4 ~ 140°F);
•
Ambient humidity: 10% ~ 90% RH (0 ~ 40°C [32 ~ 104°F]),
•
10% ~ 55% RH (41 ~ 50°C [105.8 ~ 122°F]).
Figure 2. Dimensions of the PXM4/6/8K meter display - 6" color
touchscreen (PXM468K-DISP-6-XV).
Advertisement
Related Manuals for Eaton PXM4/6/8K
Summary of Contents for Eaton PXM4/6/8K
- Page 1 640 x 480 pixel backlit VGA touch screen display. • Power: 24 Vdc input. • Recommended: PXM display power cable (67A2180H11) • between the display and PXM4/6/8K’s CM3 source Figure 2. Dimensions of the PXM4/6/8K meter display - 6” color Optional: PSG60E (85-264Vac), PSG60F (320-576Vac) touchscreen (PXM468K-DISP-6-XV). •...
-
Page 2: Installation
PIN 3 WHITE H11 (XV) PIN 2 PIN 1 PIN 1 BLACK&BARE PIN 2 BLACK&BARE PIN 3 WHITE PXMCM COM 1 RS485 Display connection Figure 5. Power and COM port connections for the PXM4/6/8K meter display touch screen display. EATON www.eaton.com... - Page 3 By default, the PXM4/6/8K meter color touchscreen display is pre- Figure 7. Changing the Modbus ID. set for a PXM4/6/8K meter Modbus address of “01” . To accommodate a different Modbus address, the user MUST change the PXM4/6/8K meter color touchscreen display’s “Modbus ID” . This number MUST match the rotary switch located on the side of the meter.
-
Page 4: Firmware Updates
PC and ethernet cable label on the back of the display (see Figure 9). Click Return. The authentication box will turn from red to green. 1. Download the firmware update file from eaton.com. Save to the 13. Click Save. PC. Unzip the folder. - Page 5 PXM4/6/8K meter color touchscreen Technical Data TD150029EN display quick start guide Effective November 2020 Notes: EATON www.eaton.com...
-
Page 6: Disclaimer Of Warranties And Limitation Of Liability
BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES. In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or other-wise for any special, indirect, incidental or consequential damage or loss...