Dryer Controls At A Glance - Maytag NEPTUNE SUPER STACK SL-3 User Manual

Dryer Controls At A Glance

1
1
Step Select Cycle
IntelliDry EASY CARE/PERM PRESS
automatically senses the moisture in the
load and shuts off when the selected dryness
level is reached. This cycle minimizes wrin-
kles of man-made fabrics such as acrylic,
nylon, polyester or blends with an extended
cool-down which tumbles the load in
unheated air at the end of the cycle. Set the
control to the desired dryness level (more
dry – less dry). The " " is the initial pre-
ferred setting for the majority of loads.
WRINKLE RELEASE will release wrinkles
from items that are clean and dry but slight-
ly wrinkled, such as from a crowded closet
or suitcase or from sitting in the dryer too
long after the end of the cycle. It provides 10
minutes of heated tumbling and 5 minutes of
cool down tumbling without heat.
Note: The dial can be turned in either direction to
select a cycle. Once started, the dial will not advance
at a specific rate during the IntelliDry cycles. At first
the dial may not advance at all. Toward the end of the
cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more
quickly. This is normal operation.
IntelliDry REGULAR automatical-
ly senses the moisture in the load
and shuts off when the selected
dryness level is reached. This
cycle is designed for loads such as
towels, underwear, t-shirts, jeans,
etc. Set the control to the desired
dryness level (more dry – less dry).
The " " is the initial preferred
setting for the majority of loads.
TIME DRY/AIR FLUFF may be
selected for any load if the
IntelliDry sensor
used. Set the control to the desired
number of minutes.
DAMP DRY is designed to "partial-
ly" dry items. It provides approxi-
mately 20 minutes of heated tum-
bling and 5 minutes of cool down
tumbling without heat.
12
system is not