NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 5 in
Procedure
1. Remove the screw that secures the I/O board to the palm-rest assembly.
2. Turn the I/O board over and peel the tape that secures the I/O-board cable to the I/O board.
3. Open the latch and disconnect the I/O-board cable from the I/O board.
4. Lift the I/O board off the palm-rest assembly.
1. screw
Removing the I/O board
computer. After working inside your computer, follow the instructions in
"Removing the optical
"Removing the base
cover".
2. I/O board
drive".
Removing the I/O board
21
After
39