NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the battery.
Procedure
1. Remove the screw that secures the optical-drive assembly to the base cover.
2. Using a plastic scribe, push the optical-drive assembly out of the optical-drive bay.
3. Pull the optical-drive assembly out of the optical-drive bay.
1. optical-drive assembly
3. screw
4. Carefully pry the optical-drive bezel off the optical drive.
5. Remove the screw that secures the optical-drive bracket to the optical drive.
NOTE:
Note the orientation of the optical-drive bracket so that you can replace it correctly.
12
Removing the optical drive
Removing the optical drive
computer. After working inside your computer, follow the instructions in
2. plastic scribe
4. base cover
5
After