Chapter 14: Replacing The Memory Module; Procedure; Post-Requisites - Dell 3000 Series Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
1. memory module
3. memory-module slot
5. tab
Post-requisites
1. Follow the procedure from step 3 to step 7 in
28 Replacing the memory module
Replacing the memory module
computer. After working inside your computer, follow the instructions in
2. securing clips (2)
4. notch
"Replacing the base cover".
14
After