Technical Specifications; Software License Agreements; Certificates And Approvals - Siemens SIMATIC TP700 Comfort INOX PCT Operating Instructions Manual

Technical specifications

5.1

Software license agreements

Microsoft licenses
License fees for the pre-installed Microsoft operating system on the HMI devices are paid
directly by Siemens to the Microsoft company.
No COA label ("Certificate of Authenticity") and no other proof of license is required for the
HMI device.
Open Source Software
If available, observe the software license agreements for Open Source software on the
enclosed data carrier "Open Source Software License Conditions".
5.2

Certificates and approvals

Approvals
Note
The following overview shows possible approvals.
The HMI device itself is approved as shown on the rear panel labels.
CE approval
The devices meet the general and safety-related requirements of the following EU directives
and conform to the harmonized European standards (EN) for these devices published in the
official gazettes of the European Community and in the EU Declarations of Conformity:
• 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
• 2014/34/EU "Equipment and protective systems for use in hazardous areas" (Explosion
protection directive)
• 2011/65/EU "Directive of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and electronic
equipment" (RoHS Directive)
36
Compact Operating Instructions, 07/2021, A5E38804191-AE
5
Comfort Panels INOX PCT