2.3
Security management for HMI devices
You can find additional information on security management of HMI devices on the Internet
at the following address:
Panel Security Guidelines (https://support.industry.siemens.com/cs/de/en/view/109481300)
2.4
Notes about usage
Installation location
The touch operating panel is designed for use in open processes and is primarily intended for
use in splash zones (according to DIN EN 1672-2).
NOTICE
The HMI device is approved for indoor use only.
The HMI device may be damaged if it is operated outdoors.
Operate the HMI device indoors only.
Note
Operate the device only in a normal atmospheric environment
The technical characteristics of the device described in the operating instructions are
guaranteed if you operate the device in normal ambient air conditions with usual air
composition.
Note
The device is intended for operation in an SELV/PELV circuit according to IEC/EN 61010-2-201
in a dry environment, which means a dry environment on the rear of the device.
You can find additional information in the section "Operating Conditions (Page 42)".
Industrial applications
The HMI device is designed for industrial applications. It conforms to the following standards:
• Requirements for emissions EN 61000-6-4: 2007 +A1:2011
• Requirements for interference immunity EN 61000-6-2: 2005
Use in mixed-use zone
Under certain circumstances, you can use the HMI device in a mixed-use zone. A mixed-use
zone is used for housing and commercial operations that do not have a significant impact on
residents.
Comfort Panels INOX PCT
Compact Operating Instructions, 07/2021, A5E38804191-AE
2.3 Security management for HMI devices
Safety instructions
15