Electromagnetic Compatibility - Siemens SIMATIC TP700 Comfort INOX PCT Operating Instructions Manual

RCM Declaration of Conformity for Australia/New Zealand
This product meets the requirements of the standards:
• AS/NZS 61000.6.4
• IEC 61000-6-4
KOREA
This product meets the requirements of Korean certification.
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며
가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Note that this device conforms to Limit Class A for emission of radio interference. This device
can be used in all areas except the residential area.
Identification for Eurasion Customs Union
• EAC (Eurasian Conformity)
• Customs union of Russia, Belarus and Kazakhstan
• Declaration of conformity according to Technical Regulations of the Customs Union (TR
CU)
WEEE label (European Union)
Disposal instructions, observe the local regulations and the section "Recycling and disposal
(Page 35)".
5.3

Electromagnetic compatibility

The HMI device satisfies, among other things, the requirements of the EMC guidelines of the
European domestic market.
EMC-compatible installation of the HMI device
The EMC-compliant installation of the HMI device and the application of interference-proof
cable is the basis for interference-free operation.
Observed the following manuals in addition to these operating instructions:
• Designing interference-free controllers
(https://support.industry.siemens.com/cs/ww/en/view/59193566)
• Industrial Ethernet / PROFINET - Passive network components
(https://support.industry.siemens.com/cs/ww/en/view/84922825)
• PROFIBUS networks (https://support.industry.siemens.com/cs/ww/en/view/1971286)
Comfort Panels INOX PCT
Compact Operating Instructions, 07/2021, A5E38804191-AE
Technical specifications
5.3 Electromagnetic compatibility
39