Steps
1. Optical drive/ hard drive module.
2. Optical drive unit.
3. Insert the optical drive into the optical drive/ hard drive module.
4. Press the Optical drive unit until it clicks in place.
Next steps
1. Install the
Front bezel
2. Install the
Side cover
3. Follow the procedure in
Solid-state drive
Removing the M.2 2230 PCIe solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
After working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
23