Removing The Heatsink - Dell D15S Service Manual

Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the hard-disk drive and optical-disk drive module
2. Install the 2.5 in. hard drive
3. Install the front bezel.
4. Install the side cover.
5. Follow the procedure in
Heat sink
Removing the heat-sink
Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the hard-disk drive and optical-disk drive module
About this task
The following images indicate the location of the heat-sink and provide a visual representation of the removal procedure.
assembly.
after working inside your
before working inside your
computer.
computer.
.
Disassembly and reassembly 35