Removing The Front Bezel - Dell D15S Service Manual

About this task
The following image indicates the location of the intrusion switch and provides a visual representation of the installation
procedure.
Steps
1. Slide the intrusion switch into the slot on the chassis.
2. Connect the intrusion switch cable to the connector on the system board. .
Next steps
1. Install the Side cover
2. Follow the procedure in
Front bezel

Removing the front bezel

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure.
12 Disassembly and reassembly
After working inside your
before working inside your
computer.
computer.