Table of Contents
Advertisement
1. Safety Information for This Machine
Handling the machine
This section explains safety precautions about handling the machine.
• Do not remove a cover or part of the machine. Doing so could result in an electrical shock.
• If you find the following, turn off its power immediately and disconnect the power cord plug, and then
report the problem to your authorized Roland DG Corporation representative. If you keep using the
machine, fire or electric shock may result:
• Generating abnormal noises
• Generating abnormal odors
• Emitting smoke
• Metal objects, water, or other fluids have fallen inside the machine
• The power cord or power plug is damaged.
• Do not touch this machine if thunder or lightning occurs in the immediate vicinity. Doing so could result in
electric shock.
• Do not bring your clothing or body close to the movable parts of the machine. They might become caught
in the machine and injury might result.
• Do not wear bracelets, etc. while using the machine. They might become caught in the machine and injury
might result.
• When touching a hot section, make sure to protect your hands by wearing heat-resistant gloves etc.
• Do not place your hand under the gantry when the machine is working. Doing so could result in injury.
• Do not touch the gantry when the machine is working. Doing so could result in injury.
• Do not touch the cable carrier when the machine is working. Touching it, you may have your hand caught
in the machine and be injured.
• Do not mount the table. Mounting it could result in injury or lowered accuracy of the board face.
• Clean the machine regularly. If dust and dirt accumulate on parts, it might cause short circuit or insulation
deterioration, and fire or smoke may result.
• Keep the warning labels on this machine legible. If any of the warning labels become so smeared that the
warning message is illegible or has come off, contact your authorized Roland DG Corporation
representative.
• Do not touch buttons, switches, or controls by mistake. Touching them by mistake might activate the
machine and cause an injury or unexpected accident.
• Make sure to wear protectors such as safety shoes and gloves when using heavy media. Using heavy media
without wearing protections might cause an injury.
• Be sure to perform inspections and replace components regularly.
12
Advertisement
Table of Contents
