Table of Contents
Advertisement
• Avoid applying the following actions to power cords because doing so can result in fire or electric shock:
• Damaging them
• Bundling them
• Modifying them
• Putting heavy objects on them
• Pulling them forcibly
• Bending them forcibly
• Do not let the prongs of the power cord plug touch anything metallic. Doing so could result in fire or
electric shock.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric shock.
• Be sure to disconnect the plug at least once a year and check for the following:
• There are burn marks on the plug.
• The plug is deformed.
• If any of the conditions above exist, do not use the plug and consult your authorized Roland DG
Corporation representative. Use of the plug could result in fire or electric shock.
• Be sure to disconnect the power cord at least once a year and check for the following:
• The power cord's inner wires are exposed, broken, etc.
• The power cord's coating has a crack or dent.
• When bending the power cord, the power turns off and on.
• Part of the power cord becomes hot.
• The power cord is damaged.
• If any of the conditions above exist, do not use the power cord and consult your authorized Roland DG
Corporation representative. Use of the power cord could result in fire or electric shock.
• Do not pull the power cord. Pulling the cord can damage the power cord. Use of damaged power cords
could result in fire or electric shock.
• Do not disconnect the power cord plug. If the machine is not going to be used for several days or longer,
contact authorized Roland DG Corporation representative.
Power Source
AC 220V, 50/60Hz, 32A, 5900W
Safety Information
11
Advertisement
Table of Contents
