Table of Contents
Advertisement
P/N 0520677_W
6. Replace clips.
7. Replace the coil cover.
8. Turn on power.
9. Verify that heater is working correctly.
10. Replace display pans. Bring merchandiser
to operating temperature before
restocking.
REPLACING DRAIN PAN HEATER —
ELECTRIC AND GAS DEFROST
(Low Temperature Only )
The drain pan heater is located as shown
below.
Remove Drain Pan Heater
1. Disconnect power.
2. Pull heater out from
under jiffy clips.
3. Position new heater
under jiffy clips. Be
sure offset is properly
positioned around the
drain. If jiffy clips are
removed, make certain
sealer is replaced.
4. Reconnect power.
5. Verify that heater is
working correctly.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Always disconnect the electrical power
at the main disconnect when servicing or
replacing any electrical component. This
includes, but is not limited to, such items
as fans, heaters, thermostats and lights.
Freedom Line Reach-in
6-3
Advertisement
Table of Contents
