Table of Contents
Advertisement
r
2-2
efrIgeratIon
FIELD INSTALLATION OF CONDENSING UNIT
(Air-cooled option)
A mounting plate is provided on top of the
case with pilot holes that provide specific
attachment points for the condensing unit
base. The mounting plate is located above
the next to last door on the right, facing the
case.After mounting the condensing unit, the
electrical box and must be re-attached to the
top.
P/N 0520677_W
/e
/C
leCtrICal
ontroller
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
The condensate pan (if provided) is packed
inside the case and must also be installed and
leveled on top of the case, then hard-wired at
the electrical box.
Exact component location is not critical;
however, the components should be mounted
in the general locations shown to ensure
that electrical connections reach, and the
condensate pan has adequate air flow from
the condenser.
Advertisement
Table of Contents
