Pentair INTELLIBRITE 5G Installation And User Manual page 12

8
5. Install the IntelliBrite
bronze pilot screw.
underwater light. This screw mounts and electrically grounds the housing
securely to the mounting ring and wet niche. Failure to use the screw
provided could create an electrical hazard which could result in death or
serious injury to pool users, installers or others due to electrical shock.
6. Fill the pool until the underwater light is completely submerged in water
before operating the light.
7. Final check for proper light operation: To check for proper operation,
switch on the main switch or circuit breaker, and the switch that operates the
IntelliBrite underwater light itself. The light should illuminate when power is
applied. If not recheck the installation steps starting with Step 1 (page 7)
FOR INTELLIBRITE POOL AND SPA LIGHT REMOVAL AND
•
Replacing the IntelliBrite
Assembly instructions, on page 3.
• Replacing the IntelliBrite Spa Light Face Ring and
Gasket or Gasket and Lens instructions, on page 19.
INTELLIBRITE 5G Pool and Spa Lights Installation and User's Guide
®
® Light assembly into the niche and tighten the special
Use only the special pilot screw provided with this
INSTALLATION INSTRUCTIONS SEE:
®
5G Pool and Spa Light