Problem Solving Guide; The Wash Programme Does Not Start - Miele PWM 514 Operating And Installation Instructions

Problem solving guide

Problem solving guide
With the help of the following notes, minor faults in the performance of the machine, some
of which may result from incorrect operation, can be put right without contacting the Ser-
vice Department. This will save time and money.
The following guide may help you to find the reason for a fault, and to correct it. You
should, however, note the following:
 Repair work to electrical appliances should only be carried out by a suitably qualified
person in strict accordance with current local and national safety regulations. Unauthor-
ised or incorrect repairs and other work by unqualified persons could be dangerous.

The wash programme does not start

Problem
The display remains dark,
and the Start/Stop sensor
control does not light up
or flash.
A fault message appears
in the display
The display is blank and
the Start button indicator
is flashing slowly.
36
Cause and remedy
There is no power to the machine.
Check whether the washing machine is switched on.

Check whether the washing machine is connected to the

power supply.
Check whether the main fuse or circuit breaker has

tripped.
The washing machine has switched off automatically to
save energy.
Switch the washing machine back on with the  button.

A programme cannot be started while there is a fault mes-
sage in the display.
Note the information in the display.

The display has switched off automatically to save energy
(Standby mode).
Press any control. Standby is ended.
