Problem Solving Guide - Miele PWM 514 Operating And Installation Instructions

Commercial washing machine
Hide thumbs Also See for PWM 514:
Table of Contents

Advertisement

Opening the door
in an emergency in
the event of a
power failure
Power failure during the wash cycle
Switch the machine off.
Switch off at the on-site mains electricity switch.
Close the on-site supply stopcocks for water or steam.
To remove the laundry, first the drain valve must be opened manu-
ally and then the drum door manually unlocked.
Guide the T 40 Torx wrench for the emergency door release through
the eye on the front of the machine.
Open the drain valve by pulling the eye using the Torx wrench.
Keep pulling the eye until the suds have drained away completely.
The suds will drain away.
The emergency drain closes automatically when the Torx wrench is
removed from the eye.
Push the eye back in as far as it will go.
The drum door cannot be opened.
 Warning! Danger from rotating drum and danger of scalding.
Before inserting the Torx wrench, make sure that the machine is
disconnected from the electricity supply, the drum has stopped
and there is no water in the machine.

Problem solving guide

33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pwm 520

Table of Contents