Table of Contents
Advertisement
Available languages
Available languages
Step 3 – Attach controller and remove the covers.
i) Attach the controller to the belt ensuring you align the magnetic connectors on the rear of the controller to
those on the holster, as shown in Fig. d.
Fig. d
ii) Remove the plastic covers from the black side of all three GelPads as shown in Fig. e. Do not throw these
plastic covers away as you will need to put them back onto the GelPads at the end of the session.
Fig. e
Step 4 - Position the belt on your body.
Wrap the belt around your waist so that the GelPads are pressed firmly against your skin, positioning the large
square GelPad over your navel (belly button). Stretch the ends of the belt around your waist until the small
GelPads are between your hip bone and ribs. Fasten the belt tightly around your waist, but not so tight as to
cause discomfort. See Fig. f.
Fig. f
N
: You can adjust the belt for a smaller waist size by folding over the left end and securing it with the additional
OTE
Velcro tab. Then securely fasten the belt around your waist as normal.
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreFit and is the answer not in the manual?
Questions and answers
Can’t work the controller
To operate the Slendertone CoreFit controller:
1. Power On/Off: Turn the controller on by pressing the power button.
2. Mute Function: Press and hold the "P" button for two seconds to mute or unmute the controller. If an error is detected, the controller will unmute automatically.
3. Keylock Function: Press and hold the "Program" and "Intensity Up" buttons for two seconds to lock or unlock the controller.
4. Error Handling: If a warning symbol and error code appear on the display, turn the controller off and then back on. If the issue persists, contact Slendertone support.
5. Battery Charging: Fully charge the controller for 3 hours before first use. It is fully charged when you hear a beep and the battery icon shows three full bars.
Ensure the device is properly set up with the included Gel Pads for it to function.
This answer is automatically generated