Table of Contents
Advertisement
Available languages
Available languages
CONTROLLER DISPLAY (ICONS)
The following are the icons which can appear on the screen during the treatment session.
P
01
49
23
49
67
32
56
49
64
53
57
0
01
When you switch on your controller, the screen will cycle though the following start-up screens. These indicate
1. Highest intensity reached in the previous session; 2. Number of sessions completed in current
program; 3. Total number of sessions completed. You may skip these by pressing the Program button.
Program number
Toning intensity level
Countdown timer
Session is paused
Sound is muted
Keylock is activated. You cannot change intensity levels or program whilst enabled.
Load Sense Warning. Indicates a poor contact between the controller and belt or
between the GelPads and skin (see page 13 for more details)
Battery charging level
Intensity increasing
Intensity decreasing
This indicates each contraction/relaxation phase - Programs 1-7
Activity indicator for cardio activity - Program 8
Activity indicator for active abdominal workout - Program 9
Activity arrow for the left side abdominal crunches - Program 10
Activity arrow for the right side abdominal crunches - Program 10
Error message. Please see troubleshooting (page 13).
63
03
25
50
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreFit and is the answer not in the manual?
Questions and answers
Can’t work the controller
To operate the Slendertone CoreFit controller:
1. Power On/Off: Turn the controller on by pressing the power button.
2. Mute Function: Press and hold the "P" button for two seconds to mute or unmute the controller. If an error is detected, the controller will unmute automatically.
3. Keylock Function: Press and hold the "Program" and "Intensity Up" buttons for two seconds to lock or unlock the controller.
4. Error Handling: If a warning symbol and error code appear on the display, turn the controller off and then back on. If the issue persists, contact Slendertone support.
5. Battery Charging: Fully charge the controller for 3 hours before first use. It is fully charged when you hear a beep and the battery icon shows three full bars.
Ensure the device is properly set up with the included Gel Pads for it to function.
This answer is automatically generated