Table of Contents
Advertisement
4 Set-up
2.
Transport the product to the installation site.
Note
Recessed handles are also located in the
lower front floor plate.
4.2
Checking the scope of delivery
▶
Check that the scope of delivery is complete and intact.
4.2.1
Scope of delivery
Num-
Designation
ber
1
Heat generator
1
The bag of small parts for the installation consists of:
–
Compression fitting, gas, R 3/4"
–
Sealing plugs for second return connection that is
not required
Enclosed documentation
1
4.3
Installation site
Note
Gas-fired heat production sources with a total
nominal heat capacity in excess of 50 kW must
be installed in separate rooms which are not used
for any other purpose, i.e. not lounges, common
rooms or other similar areas where people con-
gregate.
The product can be operated at environmental temperatures
of approx. 4 °C to approx. 50 °C.
Note
When selecting the installation site, take into con-
sideration the product's weight when it is ready for
operation, including the water content in accord-
ance with the Technical data (→ Page 38).
For noise insulation, you can use a (noise-insulating) boiler
platform or similar equipment; we recommend setting the
product up on boiler foundations of 5 cm to 10 cm in height.
▶
A separate room with ventilation and aeration may be re-
quired as the installation site. When selecting the installa-
tion site and its ventilation, observe the relevant national
regulations.
▶
Set up the product in a frost-free room.
8
4.4
Dimensions
Ø 80/125
Rp 1
Rp 1
A
VKK 226/4; VKK 286/4;
VKK 366/4: 1117 mm
VKK 476/4; VKK 656/4:
1085 mm
B
VKK 226/4; VKK 286/4;
VKK 366/4: 75 mm
VKK 476/4; VKK 656/4:
86 mm
Installation and maintenance instructions ecoVIT exclusiv 0020258610_00
691
607,5
132
125
B
Rp 1
570
C
VKK 226/4; VKK 286/4;
VKK 366/4: At least
1350 mm (without ad-
apter)
VKK 476/4; VKK 656/4:
At least 1451 mm (with
adapter)
1)
Feet, height-adjustable
by 20 mm
Advertisement
Table of Contents
Troubleshooting
