Honeywell N70462910 User Manual page 2

EN - INSTRUCTIONS FOR USE
G
ARMENT OFFERING A PARTIAL PROTECTION AGAINST CERTAIN JET CHEMICALS IN ACCORDANCE WITH
NF EN 14605 +A1 ( 2009) -
AUGUST STANDARD PARTIAL BODY PROTECTION
Warning: The choice and use of an item of personal protective equipment must comply with European Directive no. 89/656/EEC of 30/11/1989.
The employer must have first analysed and assessed the risks involved in the intervention and those generated by the use of the personal
protective equipment selected.
Foreword: This article has to be used under the supervision of the person in charge of the intervention who must have ensured in advance that:
This article offers adequate protection for the category of risks encountered during the intervention. The wearer is in possession of adequate
additional equipment (garment, gloves, respiratory mask, shoes or boots that are compatible with the desired performances). The entire
intervention is supervised and all necessary means of rescue are available in case of an incident in the course of action.
This article provides protection to parts of the body only.
Area of application: This protective clothing provides the wearer a partial protection against certain liquid chemicals, for a limited period of time.
The resistance against different chemicals is described here below. The nature of the work to be carried and the applicable chemicals together
with the related dangers determine the chemical protective clothing to be worn. If any doubt, the user must contact the product supplier.
Usage: Prior to use: Before using this protective clothing, the wearer must check that the protection offered meets the conditions for safe use.
Ensure that the clothing has been cleaned in the correct manner (following the previous usage) and inspected as described in this instruction for
use. Warning: if any doubt about the correct application, please contact your supplier or the labour inspection.
Putting in use: This garment has to be worn in a manner that, during the work, maximal protection will be achieved. Pass manually one of the
white straps through the 2 eyelets on the top of the apron in order to have a fastener around the neck. Pass manually the other white strap
through the 2 other eyelets in order to have a fastener around the waist. Slip on the apron and close it correctly. Adjust the fastener of the apron.
During use: In the event of a leakage or damage to the cloth material, leave the working environment immediately and remove the apron.
After use: Remove the apron and remove any loss particles with a brush or a cloth. Clean and check the apron as described in the part "cleaning
and disinfection" and "inspection".
Cleaning and disinfection: Reusable apron. For the decontamination procedure and recommendations see the instructions for product use.
After each session, clean the apron, using water and a mild detergent (e.g. EW 80 Tremonia Chemie, Dortmund). The washing temperature has
to be less than 30°C. Reduce mechanical action. Do not bleach. Subsequently, rinse thoroughly with clean water. Do not use solvents.
Dry the apron with a cloth and/or leave it to dry in the open air. Do not iron the apron. Dispose contaminated apron by suitable means
(depending on the chemical subjected to it).
Inspection: After each cleaning activity, check the apron for tears, holes or damage to the coating, and the performance of the complete
garment.
Storage: In the original packaging, out of light and dust, between + 5°C and + 25°C. To avoid the risk of deterioration (crushing, deformation,
etc.), this Personal Protective Equipment should be stored in its initial packaging (cardboard box) until used.
Important: This garment is not suitable for use during fire extinguishing (flammable material-keep away from fire) or for use in temperature
exceeding 50°C. This garment may only be used by persons who are aware of the dangers relating to the work to be carried out. This user
information does not contain information about additionally attached personal protective equipment, as e.g. coverall, gloves, respiratory mask
and boots. Refer to the respective user manuals. To assess the chemical durability the shortest chemical permeation time of a component has to
be considered for the complete system (suit and accessories).
Ergonomics / Safety materials: The materials employed as combined and presented are not hazardous or in any particular respect noxious
(e.g. irritant to the skin) for the wearer of the equipment. The materials used in the manufacturing of the apron do not contain any substances at
levels know or suspected to affect the health or hygiene of the use in the foreseeable conditions of use. However, we ask you to avoid direct
contact between the materials and mucous membranes.
Waste management: Refer to the local legislation.
*Resistance to permeation: NC (Non-classified) < 10 min. / Class 1 > 10 min. / Class 2 > 30 min. / Class 3 > 1 hr. / Class 4 > 2 hr. / Class 5 > 4
hr. / Class 6 > 8 hr. For more information about performances, please contact Honeywell Protective Clothing.
**Materials technical characteristics: Results obtained after 5 domestic washings at 30°C.
Caution: The selection of accessories such as coverall, boots, gloves and mask should be done consistently with the apron protection sought.
The user should verify the performance offered by such accessories against chemicals (type and concentration).
LABEL: 1.Name of the Manufacturer; 2. Product name; 3. Protection category; 4. Compliance marking; 5. # of the notified body inspecting the
production (category 3); 6. Reference standards; 7. Consult the Instructions for Use; 8. Size; 9. Batch number, month and year of production;
10. Responsible for distribution; 11. Washing instructions.
Washing instructions: a. Bleach not allowed; b. washing at 30°C max. reduced mechanical action ; c. Dry cleaning not allowed; d. Machine
drying not allowed; e. Ironing is not allowed.
Height; B (cm) chest.
SIZE: A (cm)
RESISTANCES: 1.Raw material performances; 2. Resistance to tensile; 3. Resistance to abrasion; 4. Resistance to puncture; 5. Resistance to
flex cracking; 6. Trapezoidal tear; 7.Resistance to permeation of liquids; 8.NaOH 40%; 9.H2SO4 96%; 10.Apron performances; 11.Type PB[4] -
Partial body protection clothing against certain spray chemicals.
Notice Northylon Light Apron - Indice a - Octobre 2012