Troubleshooting - Rapid PFN3490 Operating Instructions Manual

6. TROUBLESHOOTING

PROBLEM
Trigger valve leak air
Frame and nose leak air
Frame and cap leaks air
Skipping fasteners,
intermittent feed
Nail jam in tool
7. SPARE PARTS- REPAIR KITS
Kit Art.no Kit no.
5000831 A
5000832 B
5000833 C
5000844
5000845
service center only.
from you and follow these instructions to clear.
CAUSE
O-rings in trigger valve housing are
damaged
Damaged o-rings or gasket
Damaged seal or gasket
Worn bumper
Dirt in nose
Damaged magazine
Worn o-ring on piston or lack of
Broken and damaged driver blade
Nails too short or wrong size for tool.
Bent nails
Air leaks
blocked
Driver channel worn
Wrong size fasteners Bent fasteners
Broken and damaged driver blade
Description
No-mar Pad
CORRECTIVE ACTION
Tighten screws and recheck
Tighten screws and recheck
Clean
Fitting hose or air compressor needs to be
checked
Tighten screw, replace gasket
Use recommended fasteners only
Discontinue using these fasteners
Tighten screws and fittings
Check air supply
Use pneumatic tool lubricant
Check bumper, head valve spring
Use recommended fasteners only
Discontinue using these fasteners
Tighten all screws
9