Lubrication And Maintenance - Rapid PFN3490 Operating Instructions Manual

4.3 Adjusting depth penetration
4.4 No-mar pad

5. LUBRICATION AND MAINTENANCE

8
the nose of the tool.
2. To drive a nail deep, turn the wheel to left to the extent desired.
3. Make sure that the trigger and safety yoke move freely up and down without binding
or sticking after each adjustment.
on the nose.
work surface from scratches.
the tool.
Operation in cold weather:
failure.
line may freeze and prevent tool operation.
up the moving part.
Operation in hot weather:
and other rubber parts resulting in increased maintenance.
movement of safety yoke and trigger.
Squirt oil lightly with 2 or 5 oil drops into air inlet.
rubber parts.
in unsafe operation and parts breakage.