WALTERSCHEID SW41 Operating Manual page 93

8.2 Turn over the yoke if necessary.
8.3 Press one cross journal (1) against
the mandrel (2) and operate the
foot switch simultaneously until you
can remove the second bearing
bush.
8.3.1 Carry out the action steps
8.1.1 and 8.1.2 if you cannot
remove the second bearing
bush from the yoke.
The connecting fork can now be
®
removed from the cross kit.
The cross can now be removed
®
from the yoke.
9. Repeat the action steps 6 to 8 in order
to dismantle the second yoke.
Fig. 20
37