Spare And Wear Parts And Auxiliary Materials; Warranty And Liability - WALTERSCHEID SW41 Operating Manual

SAFETY INSTRUCTIONS
3.3.4

Spare and wear parts and auxiliary materials

3.3.5

Warranty and liability

20
Replace defective parts immediately.
Only use original parts from the manufacturer or parts approved
by the manufacturer for this. If spare and wear parts from third
party manufacturers are used, it is not guaranteed that they
have been designed and produced in accordance with load and
safety.
The manufacturer accepts no liability for damage caused by the
use of non-approved spare and wear parts or auxiliary
materials.
Our "General Terms of Sale and Delivery" always apply. These
have been issued to the owner at the latest on conclusion of
the contract.
Warranty and liability claims for personal injuries and damage
to property are void if they are attributable to one or more of the
following causes:
improper use of the special tool,
•
improper installation, commissioning, operation and
•
maintenance of the special tool,
operation of the special tool with defective safety devices
•
and protection equipment or improperly installed or non-
functional safety devices and protection equipment,
non-observance of the instructions in the operating manual
•
concerning commissioning, use and maintenance,
unauthorised structural changes to the special tool,
•
defective monitoring of parts which are subject to wear,
•
improperly carried out repairs,
•
catastrophes due to external influences and force majeure.
•