Overview - Assemblies - WALTERSCHEID SW41 Operating Manual

2.1 Overview – Assemblies
Illustration of the special tool SW41 and designation of the most important elements.
Fig. 1
(1) Special tool SW41 for dismantling and
mounting of yokes and crosses
(2) Mounting plate with bore holes for
bolting firmly to a worktop
(3) Foot switch with compressed air
connection for external compressed air
system. The input air pressure of the
external compressed air system must
not be less than 6 bar and must not
exceed 10 bar.
(4) Quick-change system for holding the
drift punch and the various mandrels for
the dismantling and mounting of the
yokes and crosses, can be pivoted
vertically and locked
(5) Clamping bolt for locking the quick-
change system in the required position
(6) Holders for storage of the unused drift
punch/mandrels
9