Basic Safety Instructions; General Safety And Accident Prevention Instructions - WALTERSCHEID SW41 Operating Manual

Special tool for dismantling and mounting of yokes and crosses
Table of Contents

Advertisement

Available languages

Available languages

3.4

Basic Safety Instructions

3.4.1

General safety and accident prevention instructions

Use of the special tool
Basic Safety Instructions:
always apply for the safe operation of the special tool,
are compiled in the following subchapters.
In addition to the safety instructions in this chapter, also
observe the generally applicable safety and accident
prevention regulations.
Always wear your personal protective equipment when
working on the special tool.
Observe the warning notices and instructions applied to
the special tool. In this way, you obtain important
information for the safe and faultless operation of the
special tool.
In addition to the basic safety instructions in this chapter,
also observe the action-related safety instructions of the
other chapters.
Send any people out of the close vicinity of the special tool
before you put it into operation. Pay particular attention to
children.
Before starting work, familiarise yourself with all the
equipment and control elements and their functions of the
special tool. During the work is too late for this.
Only put the special tool into operation when all safety
devices and protection equipment are installed.
It is prohibited for persons to be in the work / danger zone
of the special tool.
There are crushing and shearing points on moving parts of
the special tool which are operated by external force (e.g.
pneumatically).
You are only permitted to actuate parts of the special tool
operated by external force if there are no persons in the
danger zone of the special tool.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

1697001Special tool sw41

Table of Contents