Delayed Fax; Multiple Resolution Transmission - Brother FAX 2600 Operation Manual

Delayed Fax

During the day you can store up to 50 documents in memory for delayed sending.
Transmission of these documents will begin at the time of day you enter in Step 3. If
you have set up a time of day in the Delayed Timer function on page 4-6, you can
accept it in Step 3 or enter another time for this fax.
1
Place the original face down in the ADF.
2
For the FAX, press Function, 3, 7.
For the MFC, press Function, 1, 3, 7.
3
Accept the displayed time or enter another time for this fax and press Set.
4
Press 1 to leave the original waiting in the ADF
—OR—
Press 2 to scan the original into memory.
(See
Interrupting Delayed Fax and Polled Transmit Jobs
5
Press 1 if you want to select additional settings. The display returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings and go to Step 6.
6
Enter the fax number.
7
Press Start.
The FAX/MFC will wait to send the fax at the time you set up in Delayed Timer
(For the FAX, Function, 1, 6. For the MFC, Function, 1, 1, 6).
The number of documents you can scan into memory varies with the data they
contain.

Multiple Resolution Transmission

Use this feature to select separate resolution settings for each page of the fax
you're sending. This could be useful if you're sending a fax with photos and
letters, or some pages with small print and others with normal print. Resolution
settings return to STANDARD after the fax is sent.
1
Place the original face down in the ADF.
2
For the FAX, press Function, 3, 4.
For the MFC, press Function, 1, 3, 4.
3
Use or to select resolution for page 1,
then press Set.
4
Repeat Step 3 for subsequent pages.
5
Press Stop when you're finished.
6
Press 1 if you want to select additional settings. The display returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings and
go to Step 7.
7
Enter the fax number you're calling.
8
Press Start.
6 - 9
S E T U P S E N D
1.DOC 2.MEMORY
, page 6-10.)
ENTER FAX NO.
PRESS START KEY
PAGE 01:STANDARD
SELECT < - - > & SET