Brother FAX 2600 Operation Manual page 125

Fax Forwarding Sends a fax received into memory to another preprogrammed fax
number.
Fax Storage Your FAX/MFC can store faxes in memory for remote retrieval.
FAX/TEL You can receive faxes and telephone calls. Do not use this mode if you
are using a telephone answering device (TAD).
fax tones The signals sent by sending and receiving fax machines while
communicating information.
Fine Mode Resolution is 196 x 203 dpi. It is used for small print and graphs.
Function Mode The programming mode for changing the settings of your FAX/
MFC.
gray scale The shades of gray available for copying and faxing photographs.
group number A combination of One Touch and/or Speed Dial numbers that are
stored on a One Touch key for Broadcasting.
Interrupt Temporarily puts a waiting job on hold while you perform another
operation.
interval The preprogrammed time period between automatically printed Activity
Reports. You can print Activity Reports on demand without interrupting this
cycle.
LCD (liquid crystal display) The display screen on the fax machine that shows
interactive messages during On-Screen Programming and defaults to the date and
time when the machine is idle.
manual fax When you press Hook—OR—lift the handset so you can hear the
receiving fax machine answer before you press Start to begin transmission.
Memory Status Report Shows how much memory is being used, how much is left,
and the type of messages in memory.
memory usage Instructs the FAX/MFC how to allocate the memory.
Multi-Function Link Pro (For MFC 4600 Only) Turns your MFC into a printer
and scanner and enables PC faxing using the MFC.
One Touch Keys on the FAX/MFC control panel where you can store numbers for
easy dialing. You must use a separate key for each number.
Out of Paper Reception Receives faxes into the FAX/MFC's memory when the
machine is out of paper.
Overseas Mode Makes temporary changes to the fax tones to accommodate noise
and static on overseas phone lines.
Paging This feature enables your fax unit to call your pager when a fax message is
received into its memory.
Pause Allows you to place a 3.5 second delay in the dialing sequence stored on One
Touch and Speed Dial numbers.
G L O S S A R Y
G - 3